Teradek Bond 658 Bond 4 Pin + Cube 655

by Teradek
Availability: 7-10 days delivery
SKU
TRD-10-0658

Cube 655 can encode Full HD video streams using high-quality H.264 compression at up to 15 Mbps.  The 4-pin connector option offers superior linkage to the chassis and weather resistance for Node modems. 

€4,522.75 €3,618.20

Package includes

  • 1 x 2-pin Connector to 30 W AC Adapter 6ft Cable with International Plugs
  • 5 x USB Modem Clips
  • 1 x USB Modem Plate
  • 4 x Thumb Screw Black 4-40 x 3/8 in length
  • Cube 655 Encoder
  • 1 x 2-pin Connector to 18W AC Power Adapter
  • 1 x Ethernet Cable
  • 1 x SDI 10 inch Cable (BNC to BNC)
  • 1 x HDMI 36 inch Cable (Full Type A to Full Type A)
  • 1 x Hot Shoe Adapter
  • 2 x Wireless Antennas (2dBi 2.4/5.8 Ghz)

Encode an HDMI or SDI stream to H.264 in real-time for transmission with the Teradek Cube 655. With advanced onboard hardware, the Cube 655 can encode Full HD video streams using high-quality H.264 compression at up to 15 Mbps. The reduced bandwidth requirement of H.264 video over uncompressed video enables it to be streamed long distances over the web. The Cube 655 can connect to your network via a variety of interfaces. It features dual-band antennas for Wi-Fi connectivity, an Ethernet port for a wired connection, and a USB port for using a cellular modem.

The Cube 655's wireless capabilities make it great for on-set monitoring. Up to six iPads with the TeraView app can view the video feed simultaneously, preventing you from running out of on-set monitoring options for the director or clients.
Everything you need to start streaming with the Cube 655 is in the box. Video cables for connecting to an HDMI or SDI source, a power supply, antennas, an Ethernet cable, and a USB stick with TeraCentral software for easy monitoring on your PC or Mac.

  • The 33-point LUT support and Pomfort LiveGrade integration allow you to instantly apply a finished look on your video for on or off the set monitoring. LUTs can be applied to the video stream itself or controlled independently within the free TeraView iPad app.
  • The Cube 655 can be controlled by using either the built-in screen, along with button controls, or the web-based interface for easy access to advanced controls and configurations from the convenience of your computer or mobile device.
  • Cube's built-in SD card slot gives you the option to save high-quality backup recordings for post-event editing. Video saved to the SD card will be recorded at the same bit rate as the streaming video.
  • Compatibility with Teradek's separately available ShareLink aggregation service allows you to use multiple network interfaces and combine the bandwidth, for more consistent higher quality streaming than a single interface might normally allow.
  • A configurable test pattern generator allows you to test your stream without connecting a video source and prevents interruptions if video sync is lost.
  • Communicate with your crew, even if they're half a world away. IFB (Interruptible FoldBack) allows for talkback streams to be transmitted and received via the Cube 655.

Bond expansion module:

  • Allows a Cube Encoder to Bond 5 USB Modems
  • Secure Modem Mounting
  • Built-in Li-IOn Battery for swapping
  • Compatible with Teradek Node Modems and Core

Teradek Cube 655

Video Inputs 1 x HDMI Type A, 1.4a
1 x BNC 3G-SDI
HDMI/SDI cross-conversion supported
Supported Video Resolutions 1080p: 23.98/24/25/29.97/30/50/59.94/60 (1080p60 output is not supported)
1080PsF: 23.98/24/25
720p: 50/59.94/60
576p (HDMI only)
480p (HDMI only)
NTSC
PAL
Video Codec Compression: H.264 (Baseline, Main, and High profile)
Resolution: Up to 1080p30 / 1080i60 (built-in scaling/deinterlacing hardware)
Bit-Rate: 250 Kbps to 15 Mbps
Audio Compression: AAC-LC, MPEG Layer 2
Embedded audio input
Analog line or mic input with adjustable gain
Headphone output with adjustable volume
Protocol Support Network Protocols: TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
Transport Protocols: RTP, RTSP, RTP over HTTP, MPEG-TS (MPEG-TS is an optional paid license)
Network Ethernet: 10/100/1000 Base-T
Wi-Fi: 2.4/5GHz 802.11 ac/a/b/g/n MiMO
USB modem support
Power 1 x 2-Pin LEMO power input
Power Consumption: 5 to 8 W
Aux Power Input: 6 to 28 VDC
Environmental Temperature: 32 to 104°F / 0 to 40°C
Dimensions 2 x 1 x 4" / 51 x 25 x 102 mm
Weight 6 oz / 170 g

BOND EXPANSION MODULE

Bonding

Up to 5 USB devices
Ethernet (built into Cube)
WiFi (built into Cube)
Up to 4 iOS devices
Compatible with Cube 605/655, 715/755,
805/855


Dimensions

1"W x 3"D x .4.7"H
[24 x 77 x 120mm]
Weight

7.90z (224g)


Construction

Milled Aluminum (Chassis),
regulation-compliant PCB


Configuration Interfaces

Controlled through Cube
4x Powered USB 2.0 host port


Usb Interface Functionality

4x Powered USB 2.0 host port


Battery

Internal Li-Ion Battery


Nominal Power Consumption

0.5W, up to 5W per USB device
Power supplied by Cube



Operating Temperature

Operating: -10ºC to 50ºC
Storage: -40ºC to 90ºC


Humidity:

Operating: 5% to 95% (non-condensing)
Storage: Max. 90%