DPA VO4099U d:vote 4099 Clip Microphone, Universal

by DPA
Availability: 7-10 days delivery
SKU
DPA-VO4099U

For Use With Unusual Shaped Instruments, Compact Size, 90-Degree Mounting System, 5.5" Adjustable Gooseneck, Includes Hook and Loop Fastener Clip, Includes XLR Adapter, Detachable Cable

€547.50 €438.00

Package includes

  • DPA Microphones d:vote 4099U Universal Clip Microphone
  • XLR Adapter
  • Belt Clip
  • Clip with Hook and Loop Fastener

The d:vote 4099U Universal Clip Microphone from DPA Microphones is designed to be used with slim bodied or unusual-shaped instruments. It includes a hook and loop fastener strap that can attach the mic to the circumference of difficult to mic instruments such as oboes, clarinets, bassoons, recorders, and flutes. The clip can also be rotated 90-degrees, doubling the amount of mounting positions available.

The microphone has a compact, 1.8-inch length body and comes with a 5.5-inch gooseneck for flexibility in positioning. It has a detachable cable that terminates in a Microdot connector, providing compatibility with DPA's connection adapters for use with a variety of third party wireless systems. An XLR adapter is included for use with a wired system with 48-volt phantom power.

Transducer Type Pre-Polarized Condenser
Polar Pattern Supercardioid
Principle of Operation Pressure Gradient
Frequency Range 20 Hz to 20 kHz
+/- 2 dB, 20 cm Distance: 80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz
Sensitivity 6 mV/Pa; -44.5 dB Reference: 1 V/Pa (Nominal, +/- 3 dB)
Equivalent Noise Level Typ. 23 dB(A) Reference: 20 µPa (Maximum 26 dB(A)) (A-Weighted)
Signal to Noise Ratio 71 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL)
Total Harmonic Distortion (THD) < 1 % up to 123 dB SPL peak
< 1 % up to 120 dB SPL RMS sine
Dynamic Range 100 dB
Maximum SPL 142 dB (Peak Before Clipping)
Output Impedance MicroDot: 30 to 40 Ω, 
XLR: 100 Ω
Cable Drive Capability XLR: 984' (300 m)
Output Balance Principle Signal balanced with XLR adapter
CMRR XLR Adapter: > 60 dB at 50 Hz to 15 kHz
Power Supply Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems
48 V phantom power ±4 V with XLR adapter
Current Consumption Microdot: 1.5 mA
XLR Adapter: 3.5 mA
Connector Microdot
XLR Adapter Included
Polarity Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Operating Temperature -40 to 113°F (-40 to 45°C)
Relative Humidity Up to 90%
Cable Length 6' (1.8 m)
Gooseneck Length: 5.5" (140 mm)
Capsule Diameter 0.2" (5.4 mm)
Microphone Length 1.8" (45 mm)
Weight 1.4 oz (41 g)
Packaging Info
Package Weight 1.0 lb
Box Dimensions (LxWxH) 9.7 x 5.7 x 2.9"