Neumann AK 20

by Neumann

Raspoloživost: Isporuka 7-10 dana

SKU

SEN-071659

Neumann AK 20 - Bi-Directional Miniature Capsule for KM 100 and KM 100F Power

1.413,50 €/10.650,02kn 1.130,80 €/8.520,01kn

Tečaj konverzije: 1 EUR = 7,53450 HRK

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

1 x Neumann AK 20

Opis

The Neumann AK 20 microphone capsule is part of the KM 100 miniature series microphone systems. The AK 20 features a pressure gradient, single diaphragm transducer with a figure 8 polar pattern. The diaphragm diameter is just 16mm and all sound field components reach the diaphragm directly.

The end result is even frequency response and output levels from 0 to 180 degrees in proximity. The figure 8 polar pattern is effective in stereo MS recording (with an AK 40 or other cardioid mic), ambiance capturing or lectures and conferences with 2 speakers at either ends of the microphone.

Figure Eight Pattern: The pressure gradient element provides a figure eight pattern providing even frequency response and output levels at 0 and 180 degrees.

Modular Design: The capsule is developed for use with the KM100 and KM100F modular power supplies.

Specifikacije

Transducer	Pressure Gradient Condenser
Polar Pattern	Bi-Directional (Figure-8)
Frequency Response	20 Hz - 20 kHz
Dynamic Range (Typical)	122.5 dB
Signal-to-Noise Ratio	68 dB, Related at 1 Pa at 1 kHz (CCIR dB) 76.5 dB, Related at 1 Pa at 1 kHz (A-Weighted dB)
Maximum Input Sound Level	140 dB, Less than 0.5% THD (without Preattenuation) 150 dB, Less than 0.5% THD (with Preattenuation)
Power Requirements	Phantom +48v (KM 100 Power Supplies)
Output Impedance	50 Ohms
Output Connectors	XLR-3M Type (KM 100 Power Supplies)
Pad	Yes, -10 dB Preattenuation
Low Frequency Roll-Off	Use KM 100F
Dimensions	4.4 x 0.88" (110 x 22mm) (Length x Diameter)
Weight	3.6 oz. (102 g)