TVLogic LVM-075A 7'' Full HD Field Monitor

by TVLogic
Raspoloživost: Isporuka 14-20 dana
SKU
TVL-LVM-075A
  • 7” 1920 x 1080 (16:9) Resolution
  • White LED Backlight
  • 1:1 Pixel Mapping Modes for SD/HD
2.551,75 €/19.226,16kn 2.041,40 €/15.380,93kn
Tečaj konverzije: 1 EUR = 7,53450 HRK

Sadržaj pakiranja

  • 7" TVLogic LVM-075A Multi-Format Monitor

The LVM-075A provides an outstanding picture quality with a Full HD resolution of 1920 x 1080. The LVM-075A supports for diverse Log files for cameras and Rec.709 color gamut. All the professional features including Temperature Adaptive Color, Waveform/Vectorscope, Focus Assist, Audio Level Meter, UMD and Closed Captions are also supported.

1:1 PIXEL MAPPING MODES FOR SD/HD
Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.
3G-SDI LEVEL A/B
Supports 3G-SDI Level A/B input.

AUDIO LEVEL METER DISPLAY
Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

BLUE ONLY / MONO
Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

CAMERA LUT.
Applies the LUTs to the outbound Log signal. A LUT for every major camera manufacturer has been included(LOG-C, C-LOG, S-LOG 1,2,3 and RED Gamma 3,4).

CLOSED CAPTION
Closed caption.

FOCUS ASSIST
Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

H/V DELAY
Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

H/V FLIP
Allows the displayed image to be flipped horizontally or vertically. This feature provides flexible mounting options for camera operators.

KEY LOCK
Key Lock is a password-protection function of the OSD menu so that non-authorized users cannot change the setting of the monitor.

LUMA(Y') ZONE CHECK
Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.

MARKER
Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

MAX BRIGHTNESS ON/OFF
Displays the brightness increases from the normal up to max brightness to obtain a sharp and bright image when shooting outdoors.

RANGE ERROR
Analyzes the input signal’s Luma (Y’) and chroma (C’) information. If the input signal exceeds the designated minimum and maximum values, the pixel will blink. This function allows for the user to easily identify any issues with exposure.

TIME CODE DISPLAY
Displays the Timecode information on the screen.

UMD
Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.

USER ASPECT
Adjusts the Width /Height display ratio.

VARIOUS SCAN MODES
Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

WAVEFORM/VECTOR SCOPE
Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

ZOOM
Magnifies the input signal from 0% to 90%.

Display Spec.
 Size  7"
 Resolution  1920 x 1080 (16 : 9)
 Pixe Pitch  0.081mm
 Color Depth  16.7M
 Viewing Angle  170°(H) / 170°(V)
 Luminance  600cd/m2
 Contrast Ratio  800:1
 Display Area  155(H) x 87(V) mm
Input
 3 X BNC  Analog Input (Component)
 2 X BNC  3G-SDI A/B Channel Input
 1 X HDMI  HDMI Input
Output
 1 X BNC  3G-SDI Output
 1 X HDMI  HDMI Output
Audio
 Audio In  Embedded Audio/Analog Stereo (Phone Jack)
 Audio Out  Analog Stereo (Phone Jack), Internal Speaker(Mono)
FPGA Functions
 1:1 Pixel Mapping Modes for SD/HD,  3G-SDI Level A/B,  Audio Level Meter Display,  Blue Only,  Focus Assist,  H/V Delay,  H/V Flip,  Luma(Y') Zone Check,  Marker,  Max Brightness On/Off,  Mono,  Range Error,  Temperature Adaptive Color,  Time Code Display,  User Aspect,  Various Scan Modes,  Waveform/Vector,  Zoom
Closed Caption
 CC-608 ANC,  CC-608 LINE 21,  CC-708
Calibration
Other Functions
 REMOTE   TVLogic’s specification
 USB   Firmware update by USB cable
 Ethernet   Ethernet Control support
 Conversion   HDMI-to-HDMI,  HDMI-to-SDI,  SDI-to-SDI,
Options
  Camera Mount Ball Head,  Carring Case,  D-Tap Cable,  External Tally,  External Acrylic Filter,  Gold Mount,  Rack Mount Kit(Double),  Rack Mount Kit(Single),  Sun Hood,  V-Mount
Izdvojeni proizvodi