Teradek Cube 605 AVC HDMI/SDI Encoder GbE USB

by Teradek
Raspoloživost: Isporuka 7-10 dana
SKU
TRD-10-0605

The Cube 600 series encodes video at bitrates up to 15 Mbps for pristine quality in any application. When bandwidth is limited, adaptive bitrate allows Cube to automatically adjust and stream at the highest quality achievable.

15.300,00 kn 12.240,00 kn

Sadržaj pakiranja

  • Teradek Cube 605 H.264 HD Encoder
  • 2-Pin Connector to 18W AC Power Adapter
  • Ethernet Cable
  • SDI BNC Cable (10")
  • HDMI Type A Cable (36")
  • Hot Shoe Adapter

Teradek Cube 605 is a real-time H.264 encoder with 3G-SDI and HDMI inputs. It encodes up to 1080p video at bit rates up to 15 Mbps, allowing for high-quality images. When bandwidth is limited, adaptive bit rate allows the Cube to automatically adjust and stream at the highest quality possible. The Cube 605 can ingest up to 1080p60 signals, but outputs them with a lower frame rate of real-time 30 fps (or lower, per your selection), for a max output of 1080p30.

Cube 605 features support for 33-point 3D LUTs, as well as Pomfort LiveGrade integration that lets you monitor graded footage on the set or afterwards. Looks can be applied to the stream or controlled separately using the free Teradek TeraView app (iOS). Cube also offers support for 3G/4G USB modems.

Cube 605 has an SD card slot that enables you to record the stream for post-production, in which case the recording bitrate and resolution match the encoded stream quality. The Cube 605 also has a configurable test pattern generator that lets you test your stream without connecting a video source, and prevents interruptions if video sync is lost.

You can monitor the entire streaming process on up to six iOS devices simultaneously using the Teradek TeraView or VUER app, or six Android devices using the Teradek VLC app, or a mix-and-match of six to accommodate both iOS and Android users. This allows clients, the crew, and the director to see the footage at the same time in real time.

Cube 605 has a robust aluminum housing and an OLED display with joystick navigation buttons. It is manufactured in the USA.

Key Features

  • Real-time H.264, 1080p encoder
  • 3G-SDI and HDMI inputs
  • Adaptive bit rate encoding at up to 15 Mbps
  • Support for 33-point 3D LUTs and Pomfort LiveGrade integration
  • Support for 3G/4G USB modems
  • SD card slot
  • Test pattern generator
  • Monitoring on up to six iOS devices simultaneously
  • Aluminum housing, OLED display, and joystick navigation buttons
Video Input 1 x 3G/HD/SD-SDI BNC (75 Ohms)
1 x HDMI Type A
Bonding TeraLink
Input Resolutions 1080p 60/59.94/50/30/29.97/25/24/23.98
1080i 60/59.94/50
1080PsF 30/29/25/24/23
720p 60/59.94/50
576p (for HDMI input only)
576i
480p (for HDMI input only)
480i

*The Cube 605 will ingest 1080p60/59.94/50 but will encode it out as 1080p30 or lower (per your selection).
Video Compression H.264, Baseline, Main, and High Profile
Supported Video Bitrate 250 Kbps to 15 Mbps (15 Mbps wired)
Test Pattern Generator Support Supports custom test pattern
Format Conversion Built-in video scaler and deinterlacer
LUT Support CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
Network Protocols TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
Supported Video Transport Protocols RTMP
RTP, RTSP, RTSP over HTTP
MPEG-TS (MPEG-TS is an optional paid license)
Wi-Fi None
Remote Control Teradek Core
Audio Compression AAC-LC, MPEG Layer 2
Audio Input Embedded audio input
Analog line or mic in, adjustable gain
Audio Output Headphone output
Configuration WebUI and OLED display with joystick navigation buttons
Storage SD card slot
USB Interface Powered USB 2.0 host port
Ethernet 10/100/1000BASE-T Gigabit
Modem Support USB 3G/4G modem support
Mount Type 1/4"-20 threaded mounting holes allow for horizontal or vertical mounting
Material of Construction Milled aluminum
Power Input 2-pin connector
Power Consumption 7 W
Auxiliary Power Input 6-28 VDC
Dimensions 4.75 x 3 x 1.1 (12 x 7.6 x 2.8 cm)
Weight 11.6 oz (329 g)

Izdvojeni proizvodi