Teradek Bolt 922 Bolt 300 3G-SDI Wireless RX

by Teradek
Availability: 7-10 days delivery
SKU
TRD-10-0922

The Teradek Bolt is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2,000ft over the unlicensed 5GHz band. 

€1,347.25 €1,077.80

Package includes

  • Teradek Bolt 300 3G-SDI Wireless Video Receiver
  • 1/4"-20 Thumb Screw
  • 1/2"-20 Light Stand Adapter
  • 18 W 2-Pin LEMO Power Supply
  • SDI Cable

The Teradek Bolt 300 3G-SDI Wireless Video Receiver accepts video transmissions from a Bolt 300 transmitter up to 300 feet away in optimal line-of-sight situations. The Bolt system supports uncompressed video resolutions up to 1080p at 60 fps with 4:2:2 chroma subsampling. Because the Bolt system uses the 5 GHz wavelength, it does not require FCC licensing. Aside from being able to output video via 3G-SDI, the USB 3.0 port can stream the uncompressed video directly to a PC for recording with the GRAB Engine. Included with this transmitter is a 1/4"-20 thumb screw to mount the unit to a video rig and a 1/2"-20 adapter to secure the unit to a small light stand.

Video Resolution 1080p: 60/59.94/50/30/29.97/25/24/23.98
1080psf: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
SD: 480i(NTSC)/576i(PAL)
Color Sampling Y:Cb:Cr/4:2:2, 8-bit (10-bit with no format conversion and FPGA v.1.1.0 or later)
Inputs N/A
Outputs 1 x 75 ohm BNC
1 x USB 3.0 micro B port
Delay <1 ms (when no video format conversion is enabled)
Audio Format 24-bit 48kHz PCM
Frequencies Non-DFS: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
DFS: 5.27 to 5.55 GHz, 5.67 GHz
RF Power 15 dBm EIRP
Range Up to 300' line of sight
Power Input 2-pin LEMO 7-28 VDC
Power Consumption 8.2 W
Operating Temperature 32 to 122°F / 0 to 50°C
Dimensions 1 x 3.5 x 5.8" / 25.2 x 88.9 x 146.5 mm
Weight 12.2 oz / 346 g