Početna
Pro video
Bežični prijenos
Teradek Bolt 920 Bolt 300 3G-SDI Wireless TX/RX

Teradek Bolt 920 Bolt 300 3G-SDI Wireless TX/RX

by Teradek

Raspoloživost: Isporuka 7-10 dana

SKU

TRD-10-0920

Bolt 300 3G-SDI/HDMI Transmitter AND a Bolt 300 3G-SDI/HDMI Receiver

2.823,75 €/21.275,54kn 2.259,00 €/17.020,44kn

Tečaj konverzije: 1 EUR = 7,53450 HRK

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

2 x SDI BNC to BNC 10in Cable
2 x HDMI Type A to Type A 12in Cable
2 x SDI BNC to BNC 10in Cable
1 x 2-pin Connector to PowerTap 18 inch Cable
1 x Hot Shoe Adapter (1/4"-20 inch)
1 x SDI BNC to BNC 10in Cable

Opis

Transmit uncompressed 1080p video wirelessly over 300 feet with the Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set. Included in this set are a Teradek Bolt 300 transmitter and receiver both equipped with 3G-SDI ports. The units in this kit are compact and feature internal antennas so they can fit on your camera rig and in your video village, DIT cart, or director's monitor rig.

When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary. Unnoticeable latency is important for directors and focus pullers to see the action at the same time the camera does.

A boon for DITs, the USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording. With this video available, rough edits can be made even before the footage is offloaded from the camera.

Bolt 300 3G-SDI Wireless Video Transmitter

The Teradek Bolt 300 3G-SDI Wireless Video Transmitter accepts SDI signals and can transmit them to a Bolt 300 Receiver up to 300 feet away in optimal line-of-sight situations. The Bolt system supports uncompressed video resolutions up to 1080p at 60 fps with 4:2:2 chroma subsampling. Because the Bolt system uses the 5 GHz wavelength, it does not require FCC licensing. Included with this transmitter is a shoe adapter to mount the unit to a camera's standard accessory shoe and a D-tap to LEMO power cable so you can power the unit with an onboard battery with a D-tap output.
Bolt 300 3G-SDI Wireless Video Receiver

The Teradek Bolt 300 3G-SDI Wireless Video Receiver accepts video transmissions from a Bolt 300 transmitter up to 300 feet away in optimal line-of-sight situations. The Bolt system supports uncompressed video resolutions up to 1080p at 60 fps with 4:2:2 chroma subsampling. Because the Bolt system uses the 5 GHz wavelength, it does not require FCC licensing. Aside from being able to output video via 3G-SDI, the USB 3.0 port can stream the uncompressed video directly to a PC for recording with the GRAB Engine. Included with this transmitter is a 1/4"-20 thumb screw to mount the unit to a video rig and a 1/2"-20 adapter to secure the unit to a small light stand.

Specifikacije

Bolt 300 3G-SDI Wireless Video Transmitter
Video Resolution	1080p: 60/59.94/50/30/29.97/25/24/23.98 1080psf: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 SD: 480i(NTSC)/576i(PAL)
Color Sampling	Y:Cb:Cr/4:2:2, 8-bit (10-bit with no format conversion and FPGA v.1.1.0 or later)
Inputs	1 x 75 ohm BNC
Outputs	1 x 75 ohm BNC (loopthrough)
Delay	<1 ms (when no video format conversion is enabled)
Audio Format	24-bit 48kHz PCM
Frequencies	Non-DFS: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz DFS: 5.27 to 5.55 GHz, 5.67 GHz
RF Power	17 dBm EIRP
Range	Up to 300' line of sight
Power Input	2-pin LEMO 7-28 VDC
Power Consumption	6.5 W
Operating Temperature	32 to 122°F / 0 to 50°C
Dimensions	1.1 x 2.6 x 4.4" / 27 x 66.1 x 112.3 mm
Weight	9.2 oz / 262 g

Bolt 300 3G-SDI Wireless Video Receiver
Video Resolution	1080p: 60/59.94/50/30/29.97/25/24/23.98 1080psf: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 SD: 480i(NTSC)/576i(PAL)
Color Sampling	Y:Cb:Cr/4:2:2, 8-bit (10-bit with no format conversion and FPGA v.1.1.0 or later)
Inputs	N/A
Outputs	1 x 75 ohm BNC 1 x USB 3.0 micro B port
Delay	<1 ms (when no video format conversion is enabled)
Audio Format	24-bit 48kHz PCM
Frequencies	Non-DFS: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz DFS: 5.27 to 5.55 GHz, 5.67 GHz
RF Power	15 dBm EIRP
Range	Up to 300' line of sight
Power Input	2-pin LEMO 7-28 VDC
Power Consumption	8.2 W
Operating Temperature	32 to 122°F / 0 to 50°C
Dimensions	1 x 3.5 x 5.8" / 25.2 x 88.9 x 146.5 mm
Weight	12.2 oz / 346 g

Izdvojeni proizvodi

Teradek Bolt 920 Bolt 300 3G-SDI Wireless TX/RX

Sadržaj pakiranja

Bolt 300 3G-SDI Wireless Video Transmitter

Bolt 300 3G-SDI Wireless Video Receiver