Workswell WIRIS Gen.2– thermal imaging camera for drones, 640 x 512 pixels, 13mm

by Workswell
Dostupnost: Isporuka 7-10 dana
SKU
W-WIRIS-Gen2

Workswell WIRIS Gen.2– thermal imaging camera for drones, 640 x 512 pixels, 13mm

13.687,25 € 10.949,80 €

Sadržaj pakiranja

  • Workswell WIRIS thermal imaging system
  • Your chosen lens
  • Calibration certificate
  • USB Flash drive 32Gb
  • HDMI cable
  • Servo connectors (PWM)
  • Power supply cable
  • Software “Workswell CorePlayer” licence
  • Hard transport case

Since the end of 2016, the second generation of Workswell labelled “WIRIS 2nd gen” has been available. Apart from its temperature range extended up to 1500°C(using a high temperature filter), the second generation of the Workswell WIRIS product offers the following functions:

  • SBus
  • CAN bus for DJI A2, A3 and GPS
  • full integration to DJI M600
  • A faster 10Hz GPS with a jack connector
  • The new TIFF format for storage of images
  • A possibility of controlling the equipment through TCP/IP
  • Real time hours are significantly more accurate now
  • Digital outputs for the autopilot and GPS synchronisation
  • An integrated stabilised source for the RC receiver
  • 4 openings for an easier installation on the gimbal

Fully radiometrics and temperature measurement

Remotely, it is possible to view and store fully radiometric and calibrated image data (images and video) – ie. records that retain all the information about the capturing parameters, which can be subsequently fully processed in the supplied software.

Digital ZOOM

If the task is to measure distant objects, then you will appreciate the digital zoom option. In the case of a digital camera, a zoom of up to 16x is available; in the case of a thermal camera then up to 14x (with the resolution 640×512).

Photogrammetry and 3D models

Images captured by the system are fully radiometric and contain information about GPS coordinates in the EXIF metadata of the files. Such images can be subsequently used to create a 3D model – with the aid of a specialized software (for instance Pix4D).

GPS

You can link the image temperature data with the value from an external GPS receiver. GPS data is saved into the EXIF part of the JPEG file and is available for use.

HDMI Wireless transfer

The video output for the WIRIS system is standard HDMI. When using for instance Connex the wireless transfer of an image up to the distance of 1 km is possible! On the standard screen on the control unit you can view the video output as well as all menus and the other system functions.

Calibration

Each Workswell WIRIS thermal imaging system is shipped fully calibrated and comes with a calibration certificate. The measurement precision of each WIRIS system is tested using reference black body sources over the whole range of measured temperatures.

Modes and alarms

Standard Infrared image

Standard mode allows users to set different color palettes, maximum and minimum temperature analysis, set automatic or manual temperature range and displays all the data on the operator’s controller on the ground.

Alarm (security) mode

Alarm mode allows users to set a temperature limit and see (find) only objects (places) with higher or lower temperature than is set, eventually temperatures between or above and below two limit values. This is the key mode for security and industrial applications. Maximum and minimum analysis is also available in this mode.

Digital camera mode

Digital camera mode allows the operator to see the area in the visible spectrum. Parallel view of digital camera enables better orientation in space and user can easy guide the drone above the desired location.

 Workswell WIRIS 640
  Thermal Imaging Camera  
Resolution 640 x 512 pixels
FPA active sensor size 1.088 x 0.8705 cm
Temperature ranges -25°C to +150°C 
-40°C to +550°C (optional +1 500°C on request)
Temperature sensitivity 0.05°C (50mK)
0.03°C (30mK) available on request
Accuracy ± 2% or ± 2°C (In high temperature range 0°C to +550°C)
Spectral Range 7.5 – 13.5 μm
Calibration Yes
Detector type Uncooled VOx microbolometer
Lenses Interchangeable and focusable, various field of view
Available lenses 18°, 32°, 45°, 69°
Focus Manual
ital zoom 1 – 14x continuous
  Digital Camera  
Resolution 1 600 x 1 200 pixels
Focus Fixed
Digital zoom 1 – 16x continuous
  Screen real-time information  
Modes IR mode, digital camera mode
Multimode View (PiP) Yes
Max/Min/Center temp. Automatic hot spot and cold spot detection, center point measurement
Temperature Range Automatic or manual
Real time clock Displayed on a screen and saved in every image
Size of the memory Real-time calculation of free memory on board
Digital zoom Up to 14x in thermal camera, up to 16x in digital camera
Time to Non-uniformity correction (NUC) Can be set time interval when the NUC will be done
Information from GPS Number of satellites, altitude, speed, GPS position
Languages English, French, Spanish, German and Czech
Remote Control
Digital inputs / CAN bus for DJI M600Pro full control 7x PWM digital inputs for complete control of WIRIS during the flight or using standard DJI controller for full control of all WIRIS functions
SBus protocol Supports up to 18 channels using only one single cable
PWM trigger By servo connectors (PWM) via UAV controller
PWM power supply Integrated power supply for RC transmitters (5 V)
External trigger (TTL trigger) Images: can be saved every 500 ms by trigger
Video: start or stop recording by trigger
Digital outputs Autopilot confirmation trigger and GPS synchronization
Full menu navigation By only 2 digital inputs (Up/Down – Ok/Cancel via UAV controller)
Image recording Saved by PWM, SBus or External (TTL) trigger
Video recording Can be start/stop by PWM, SBus or External (TTL) trigger
Display mode switching Can be changed by trigger through digital inputs
Palette control All 19 palettes can be changed via UAV controller during the flight
Other controllable functions Temperature range settings, Alarm mode (isotherms), Max/Min/Center point analysis, zoom, image capturing, video capturing, modes etc.
  Memory and Data Recording  
Memory Internal:32 GB (up to 80000 images or 200 minutes of video)
External: recording directly on USB stick
Image recording Radiometric image and digital JPEG image can saved by trigger
Radiometric image format: JPEG or TIFF
Video recording Radiometric video recording can be start/stop by trigger
Periodic image capturing Yes, adjustable interval between 1 to 60 s (IR and digital saved on trigger)
GPS location info GPS data is stored in EXIF when external GPS is connected
Remote control Data are recorded by PWM, SBus or External (TTL) trigger
File management Images and video from each flight are stored in separate folders
File transfer Selected folders are transferred to USB flash disk
Measurement Functions
Measurement functions Center spot, Hot/Cold spot detection, Peak Max/Min spot detection
Alarm mode (isotherm) Above, Below, Between, Above & Below
Hot/Cold spot detection Auto hot and cold spot detection with temperature values
Alarm Mode (isotherm) Above, Below, between, above & below
Peak Max/Min detection Measurement interval 1 to 100 s
Temperature unit Celsius, Fahrenheit, kelvin
Emissivity correction Adjustable in WIRIS directly or in Software
Other corrections Reflected ambient temperature, atmospheric temperature
Software
Workswell CorePlayer Images and video analyzing software tool
Workswell ThermoFormat Useful for massive processing of IR images
  Video Output  
Interface Standard HDMI (digital)
Resolution 1280 x 720px, 1024 x 768px, 1024 x 600px, 800 x 600px
Aspect ratio 16:9
  Other Connectivity  
USB 2.0 transferring data and updating the system via USB stick
GPS (10 Hz) NMEA protocol, TTL 5 V logic
External GPS GPS can be connected via Mavlink or CAN bus
SBus Supports up to 18 channels using only one single cable
CAN bus (on request) Yes, compatible with DJI A2 and A3, GPS image geotagging
Mavlink Yes, compatible with Pixhawk, GPS image geotagging
Ethernet (on request) TCP/IP control and data downloading
  Power Supply  
Input Supply Voltage 6 to 36 V DC
Power dissipation < 6W (max. 8W during calibration event of approx. 0.5 seconds)
Power Connector Coaxial 2.1 x 5.5 mm, outer shell – GND
  Dimensions/Weight  
Dimensions 135 x 77 x 69 mm
Weight < 390 g
Mounting 4x 1/4-20 UNC thread (2x bottom side and 2x top side)
Operating Environment
Operating temperature -15°C to +50°C
Storage temperature -30°C to +60°C
Humidity 5% to 95% non-condensing
Izdvojeni proizvodi