Sennheiser MKH 20 P 48

Raspoloživost: Isporuka 7-10 dana

SKU

SEN-002857

Omni-directional RF condenser microphone. Ideal as a main microphone for orchestras and solo instruments. Picks up the natural acoustics of the room. Exceptionally low inherent self-noise. Light metal body.

1.928,00 €/14.526,52kn 1.542,40 €/11.621,21kn

Tečaj konverzije: 1 EUR = 7,53450 HRK

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

1 MKH 20, 1 MZS 40 shock mount,
1 MZW 41 windshield, 1 pressure build-up ring

Opis

The MKH 20 P48 Microphone from Sennheiser is a versatile, professional omnidirectional condenser microphone designed for spot instrument, group or ambiance capturing. The 12 Hz to 20 kHz frequency response eliminates noise and rumble associated with natural acoustics. The sensitivity and SPL response makes it a favorite as a main microphone for capturing orchestras and solo instruments. An attenuator switch allows an additional 10 dB of headroom when using in close proximity to signals high in transients. A pressure build-up ring is included and is used to accentuate high-frequency response. The microphone is powered via +48V phantom power source.

Specifikacije

Transducer	Condenser
Polar Pattern	Omnidirectional
Frequency Range	20 Hz to 20 kHz
Equivalent Noise Level	10 dB A-Weighted 20 dB CCIR
Maximum SPL	134 dB SPL 142 dB SPL
Pad	-10 dB
Impedance	150 Ohms
Load Impedance	1000 Ohms

General
Output Connectors	1 x 3-Pin XLR
Operating Current Consumption	2 mA
Operating Voltage	48 V ± 4 V
Length	5.91" / 150 mm
Diameter	0.98" / 25 mm
Weight	3.53 oz / 100 g