Bresser T-13 Spare or Additional Receiver

by Bresser

Raspoloživost: Isporuka 14-20 dana

SKU

F001146

Receiver to extend the BRESSER T-13 Set
8 channels
Connection via jack socket
Dimensions: 75 x 30 x 20 mm, weight: 40 g

23,25 €/175,18kn 18,60 €/140,14kn

Tečaj konverzije: 1 EUR = 7,53450 HRK

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

1x receiver
jack plug adapter

Opis

Single receiver as a replacement or extension for the BRESSER T-13 radio controlled trigger set.

The receiver is operated by 2 AAA batteries (not included). The receiver is connected to the studio flash with a cable with 3.5 mm jack plug. Suitable for almost all studio flashes.

Severeal receivers can be connected to one sender! When a studio flash is triggered with this set then all other studio flashes near by with an integrated slave will trigger automatically. If a flash has no slave or if it doesn't trigger due to its positioning you can buy an additional receiver to make 100% sure that all studio flashes trigger simultaneously.

Specifikacije

ELECTRONICS, HARDWARE & SOFTWARE
Batteries needed2	2x AAA (Micro), 1.5V
GENERAL TECHNICAL DATA
Colour	black
Material	Plastic
DIMENSIONS & WEIGHTS
Total length	75 mm
Total width	30 mm
Total height	20 mm
Net weight (without access.)	40 g

Izdvojeni proizvodi