Bresser SH-600A Bi-Color LED Lamp + V-Lock

by Bresser
Raspoloživost: Isporuka 14-20 dana
SKU
F001341

High quality semiconductors
Ultra bright LEDs of the last generation
Perfect daylight spectrum
Uniform distribution and high light output
Long lifetime
Very good price / quality ratio
Ultra slimline and lightweight

2.000,00 kn 1.600,00 kn

Sadržaj pakiranja

  • 1x LED Studiolamp 36W
  • 1x power cord
  • 1x ball joint
  • 1 x diffuser filter 5600k

BRESSER is a big term in the development of high-quality LED lamps for the photo and video studio. These new developments are applied throughout their models. The BRESSER LED lamps have a large and uniform light output over the entire range. This is due to the use of high-quality semiconductor materials.

For many suppliers, the default value assumes that 1 Watt power consumption of an LED lamp can be compared with 5 Watt of a neon tube and with 25 Watt of a halogen lamp. They understand that this is very relative and it is also dependent on the quality and type of LED technology. Also, the light distribution of a halogen lamp is different from that of an LED, and it seems that in the case of post-measurements these standard values were usually far too high. We are therefore a bit more careful, so you will not be disappointed afterwards. With the BRESSER LED lamps 1W LED is about 16W halogen. So, an LED lamp of 25 watts is comparable to a 400 watt halogen lamp. (Measured at a distance of 1 meter)

The BRESSER LED lamps are very well suited for portrait and product photography and video productions. The color temperature of 5500K can be compared with daylight. With the enclosed 3200K artificial light conversion filter, which can be quickly replaced by the magnets, they can also be used for film and video recordings. With the optional soft / diffus filter can also be exposed from near with floodlight effect. A big advantage of LED lamps is that they do not become warm and can therefore be used without risk for a long time. The average lamp life is 50,000 hours. The lighting intensity is infinitely variable and the lamp can be connected both to the mains and to the optional Lithium NP-F750 battery. On this full battery, the lamp can burn for about two hours. At the bottom of the lamp is a ball joint with which it can be placed in any desired position.
Bi-color function
Thanks to the Bi-Color function, this lamp is suitable for photo and video recording. This allows very fast switching between the different color temperatures. The light intensity and color temperature between 3200K and 5500K are adjusted with the two buttons on the back.

ELECTRONICS, HARDWARE & SOFTWARE
Illuminant LED
Colour Rendering Index % 95
Izdvojeni proizvodi